Quote:
Originally Posted by IneedAZ
Have you modified yours?
|
Yea...The ZL1 works the same way the only difference is your fuel system control module is called a CCM instead of FSCM. I believe the 2016's were the last year to get the FSCM which carried over from the 5th gen Z28.
Some have tried to say different percentages will open or close the valves that amount but that has not been my experience. The valves either open or close. IF you want the valves closed then set those cells to 100. If you want the valves open then set the cells to -1 for both open and closed tables.
This is how I have mine setup:
Touring mode 0: all cells below 4k rpm set to 100 for both open closed. all cells -1 in the 4k rpm colum. That way the exhaust will open if you happen to kick in down because you don't want to run it high in the RPM with the valves closed.
Sport mode 1: all cells -1 down to 7th gear, 8th gear set 100 up to 3k rpm for both open closed.
Track mode 2: all cells -1 for both open closed
Snow/Ice mode 3: all cells 100 for both....
Also set exhaust rumble mode to 0 in touring mode. That will help reduce the "bark" on start up.