CAMARO6 - View Single Post

oldman · 08-22-2021, 08:51 PM

looks like 12v on hot, 5 volts on ground and I did not test the small wire in the harness figure it was to 1) verify the fan on or 2) some sort of temp sensor or don't really know

5 volts on the negative says I screwed up on the ground or my son did something cause I noticed he put 6400 mile on over the past 10 months. Car meant to be used anyway.

Any pictures of locations of the ground point would be appreciated.

08-22-2021, 08:51 PM	#6
oldman Drives: SS 6 speed of course Join Date: Jan 2016 Location: Hilo, HI Posts: 4,346	looks like 12v on hot, 5 volts on ground and I did not test the small wire in the harness figure it was to 1) verify the fan on or 2) some sort of temp sensor or don't really know 5 volts on the negative says I screwed up on the ground or my son did something cause I noticed he put 6400 mile on over the past 10 months. Car meant to be used anyway. Any pictures of locations of the ground point would be appreciated. __________________ Forged short block, large duration sub .600 lift Cam Motion cam, 7200 RPM fuel cut, Pray Ported Heads, 3.85 pulley D1X, stage II intercooler, DSX secondary low side, DSX E85 sensor, Lingenfelter big bore 2.0 pump, ported front cats, 60608 Borla, LT4 injectors, ZL1 1LE driveshaft and Katech ported TB, ported MSD intake, BTR valvetrain, ARP studs, ProFlow valves, PS4 tires.