CAMARO6 - View Single Post

LiqTenExp · 07-22-2021, 07:45 PM

Click on System (looks like a blue fan)
Click on Fan Tab

Set "Mech Thermostat" to 174

Go into "Desired %" and adjust the fans so they come on sooner, I have attached mine as a reference, by no means is it the standard setting for this 174, it is what I like

Go into "Desired ECT" and adjust similar to what I have attached, again these are my settings, if someone else recommends different I'd even review it and see how it compares. The RPM zones are defined near the "Mech Thermostat" setting, torque are slightly to the left.

I run 180-195°F ECT with this during normal driving, it will rise to 200-215 on a big pull but come back down to 190 or less in under 45s at highway speed.

07-22-2021, 07:45 PM	#41
LiqTenExp Drives: 2017 ZL1 Join Date: Jan 2017 Location: NJ Posts: 926	Click on System (looks like a blue fan) Click on Fan Tab Set "Mech Thermostat" to 174 Go into "Desired %" and adjust the fans so they come on sooner, I have attached mine as a reference, by no means is it the standard setting for this 174, it is what I like Go into "Desired ECT" and adjust similar to what I have attached, again these are my settings, if someone else recommends different I'd even review it and see how it compares. The RPM zones are defined near the "Mech Thermostat" setting, torque are slightly to the left. I run 180-195°F ECT with this during normal driving, it will rise to 200-215 on a big pull but come back down to 190 or less in under 45s at highway speed. Attached Images __________________ 2017 Camaro ZL1 Coupe M6 (847whp Dynojet on 93) Last edited by LiqTenExp; 07-22-2021 at 08:04 PM.