CAMARO6 - View Single Post

20Bluezl1 · 07-17-2021, 11:26 AM

If you look for the thread I have started I wrote up how I did it . I used the sound tube plate and drilled a hole and grommet. You have to depin the AEM connector to pass the wires thru the grommet.

07-17-2021, 11:26 AM	#2
20Bluezl1 Drives: 2020 Zl1 A10 Riverside Blue Join Date: Mar 2020 Location: NJ Posts: 1,238	If you look for the thread I have started I wrote up how I did it . I used the sound tube plate and drilled a hole and grommet. You have to depin the AEM connector to pass the wires thru the grommet. Attached Images Last edited by 20Bluezl1; 07-17-2021 at 11:40 AM.