CAMARO6 - View Single Post

my3sons_nh · 06-03-2021, 10:00 AM

Just had a set of Continental ExtremeContact DWS06+ installed on my '18 2SS Vert to replace OEM runflats. Definitely a much smoother ride however.

I felt vibration in the wheel at 70+ and figured they didn't balance the fronts correctly. I checked the front sidewalls and noticed the "Inside" marking is on the outside of the tire. The rears are fine and say "Outside". Could this be the source of the vibration and could this cause any other issues with performance/longevity?

Regardless, I asked my installed to remount them correctly so the fronts indicate "Outside" as they should.

06-03-2021, 10:00 AM	#1
my3sons_nh Drives: 2018 2SS A8 Convertible Garnet Red Join Date: Nov 2018 Location: North Central MA Posts: 47 View My Garage	Sidewall: Inside v. Outside Just had a set of Continental ExtremeContact DWS06+ installed on my '18 2SS Vert to replace OEM runflats. Definitely a much smoother ride however. I felt vibration in the wheel at 70+ and figured they didn't balance the fronts correctly. I checked the front sidewalls and noticed the "Inside" marking is on the outside of the tire. The rears are fine and say "Outside". Could this be the source of the vibration and could this cause any other issues with performance/longevity? Regardless, I asked my installed to remount them correctly so the fronts indicate "Outside" as they should. __________________ ==================== 2018 2SS Convertible \| Garnet Red Tintcoat \| Kalahari 2012 Jeep Grand Cherokee (Daily) Last edited by my3sons_nh; 06-03-2021 at 10:01 AM. Reason: Remove extra line spacing