After months of R&D we are pleased to announce the upcoming release of “LaunchBox 8/10” patpend. This is an all in one solution for your launch needs, A8 or A10, we got you covered. No tune, no aftermarket stall converter, no line-lock, no launch control and no factory foot brake launches. Lower your 60 foot, decrease reaction times and ETs with our “plug&play” LaunchBox.
For pricing (TBD) and more info - Email us at
prolaunchbox@gmail.com
Here is a quick intro video showing the extremely easy install and testing the transbrake in my garage. I am just a friend and customer of the product. Please use the email above for ordering and questions.
Install Steps for 6th gen Camaro:
1. Disconnect battery
2. Remove Passenger side wheel liner.
3. If you have Aux rad, loosen the 3 bolts holding it.
4. Unplug factory tcm harness.
5. Unsnap TCM and turn the TCM 180 degree. Snap TCM back into place (this ensures no water will enter the harness)
6. Plug LaunchBox plug into the TCM.
7. Plug factory harness into LaunchBox harness.
8. Route small LaunchBox harness inside the car.
9. Mount LaunchBox.
10. LaunchBox has a second harness, with three wires. Red = 12vt key on. Black = Ground. White = Trigger Ground.
Videos launching the car off the transbrake/2step in boost are coming!!!