CAMARO6 - View Single Post

Clearly_Canadian · 05-12-2021, 04:07 PM

I just installed this yesterday. Not the hardest thing to install, but with limited space between the pillar and dash, routing wires was a BIT@#. Also, the top clip that is reused doesn't clip/snap into place and it is not aligned. I need to spend some more time on it. I was overly frustrated with routing the wires that I rushed the end for fitment. But it seems like something is in the way preventing the top from clipping in. The mic is clipped in properly. The only thing I can think of is that bungee cord is twisted up when I slid it back into place.

05-12-2021, 04:07 PM	#25
Clearly_Canadian Drives: 2017 2SS Camaro Join Date: Mar 2015 Location: British Columbia Posts: 366	I just installed this yesterday. Not the hardest thing to install, but with limited space between the pillar and dash, routing wires was a BIT@#. Also, the top clip that is reused doesn't clip/snap into place and it is not aligned. I need to spend some more time on it. I was overly frustrated with routing the wires that I rushed the end for fitment. But it seems like something is in the way preventing the top from clipping in. The mic is clipped in properly. The only thing I can think of is that bungee cord is twisted up when I slid it back into place. __________________ 2017 Camaro 2SS, K&N Air, Borla S-Type, Cat Delete, 1LE replicas, Hotchkis Swaybars, Eibach Springs. ALL BMR arms, end links, chassis braces and cradle lockout. Hurst shifter.