Quote:
Originally Posted by 1ssa_camaro
Hey guys I just got some new wheels and tires. They’re 20x10.5 with 305/35/20 Nitto nt555R in the rear and 20x9.5 nitto nt555 g2 275/35/20 in the front.
Before installing them I rerouted the wiring harness how everyone recommends to do. After the first drive the traction control light keeps coming on. Is there a way to remove this. Took it out for a spin about an hour later to see if the issues resolves but still there.
I’ve seen some people run this setup perfectly fine. They just moved the wiring harness and drove fine.
I’ve seen that some people say that it removes in a day or two or others unplug their battery for 5-20 mins. New wheels and tires do have tmps sensors as that light has not come on.
Any recommendations. Moving down tire sizes to a 305/30 is not an option as of now. Thank you.
|
I'm one of those who've been running this setup for over a year and a half without problems. The only differences are I run a 10 in the front and a 11 in the rear also mine are Continental Extreme Contacts Sports all the way around. I did have to move my harness but other than that no issues and my rotors are fine because I've checked them when I switched to the Z26 brake pads.