CAMARO6 - View Single Post

pzoom · 05-02-2021, 04:02 PM

I noticed the console can barely fit a phone and it seems to get really hot, so I made this pocket that slides in the space between the carpet and center console. No velcro or tape needed. I designed it for my iPhone 7 (fits a 5 as shown) and probably fits others.

Inside pocket is ~.4" x 5.4"

The files are attached if you want to modify as well as the .STL if you just want to slice and print.

Not an M.E., but I like to have fun in Solidworks. If you do make improvements, please post in this thread so everyone can take advantage. Thanks!

05-02-2021, 04:02 PM	#1
pzoom Drives: 2021 SS 1LE SHOCK Join Date: Mar 2021 Location: Austin Posts: 136	Phone holder (3D print) I noticed the console can barely fit a phone and it seems to get really hot, so I made this pocket that slides in the space between the carpet and center console. No velcro or tape needed. I designed it for my iPhone 7 (fits a 5 as shown) and probably fits others. Inside pocket is ~.4" x 5.4" The files are attached if you want to modify as well as the .STL if you just want to slice and print. Not an M.E., but I like to have fun in Solidworks. If you do make improvements, please post in this thread so everyone can take advantage. Thanks! Attached Images Last edited by pzoom; 05-02-2021 at 04:13 PM.