CAMARO6 - View Single Post

IneedAZ · 04-07-2021, 05:29 PM

So, these are Weld Racing 17x 10 rears and 18x8 fronts. I went with Nitto G2 up front with R2 rears. I installed oem tpms sensors using the strap kit on all 4. I will not be leaving this setup on the car til I have worn out the tires on my oe wheels. At that point I will leave the new stuff on.

Ignore the fender tire gap as I just lowered the car back down and took pics so the springs need to settle again.

04-07-2021, 05:29 PM	#1
IneedAZ Drives: 2017 ZL1 A10 & 2021 BMW M340i x Dr Join Date: Mar 2009 Location: Tampa Posts: 5,111 View My Garage	Finally put my new wheels on So, these are Weld Racing 17x 10 rears and 18x8 fronts. I went with Nitto G2 up front with R2 rears. I installed oem tpms sensors using the strap kit on all 4. I will not be leaving this setup on the car til I have worn out the tires on my oe wheels. At that point I will leave the new stuff on. Ignore the fender tire gap as I just lowered the car back down and took pics so the springs need to settle again. Attached Images __________________ Sold 2012 2LT RS 12.3@112 old setup Sold 1967 Camaro Pro Street. Ran 10's mild BB on NOS. 2017 HyperBlue ZL1 A10 Born 3/17/17Delivered 4/08/17 2020 Build: Mag2650, BTR Stage2, NW103, BG, 14% lower, 90mm upper, ARH 2" Long system w/no cats, SW Legend mufflers. 807hp/762tq on 93 gas and 848hp/792tq on e47 Sold 2018 (Go Mango) Dodge Charger Daytona 392 Daily Driver Daily Driver 2021 BMW M340i Xdrive