Thread: Turbo 6.2 Build
View Single Post
Old 03-28-2021, 05:46 PM   #372
Choda
 
Drives: Turbo 6.2
Join Date: Feb 2019
Location: Buffalo
Posts: 736
Fired it up. So far so good. Couple things I still need to finish up but I’m pretty happy.

My oil drain fitting is leaking. Kinda weird but I’ll take it apart and back together.

Throttle body codes. It sounds as though it opens and closes quickly before the car starts. I revved it up and it threw the tb codes and went into engine reduced power mode. W the key on, the blade doesn’t open all the way using the pedal. I’m not sure if there is a relearn or something.

02 extension harness was bad causing bank 1 to get all crazy. New one is coming.

Need to wire and install ebc. I’ll probably swap wide bands so I can integrate with my ebc. My current wb is ballenger 500v2 and does not have a native connection.

Check trans fluid level.

Install new snky game changer that should be here in 2 weeks

https://youtu.be/tR_olKeVyTo
Attached Images
 
__________________
2016 Twin Turbo Camaro SS - 968hp/970tq 8.9@153
2018 LTZ Z71 Redline Silverado - 381hp/420tq 13.8@100

Last edited by Choda; 03-28-2021 at 06:06 PM.
Choda is offline   Reply With Quote