Quote:
Originally Posted by jorgesvlog
great information! I was under the impression that the LPE big bore was based off the LT1 pump so it should run well at around 2100 psi similar to the stock LT1. you might have a little more room to drop psi from 2400 to 2100 for some better headroom on your lowside.
|
It is and we will probably drop it lower if need be. Keep in mind when you drop rail pressure the Injector pulse width increases. So I was basically trying to find a balance of keeping both sides happy. The Z06 just received a Cordes low side over the Winter and Spring rains are currently cleaning off the roads... so logs are coming soon!