Quote:
Originally Posted by S2000_Europe
I have my18 Zl1. I want a square set up with 19". I found that only apex ARC8 works:
19x10” ET20 with 285/35-19 tires but I will have smaller tires in the back
Front: 19x11” ET11 - 305/30-19
Rear: 19x11” ET43 - 305/30-19 but it is not truly a square set up.
in your fitment guide I found this:
Front and Rear: 19x10.5” ET22 with 305/30-19 tire BUT needs 12 mm spacer and negative camber in the rear, is this recommendation for just SS owners or spacers are needed for ZL1?
I am between sm10 and arc8
|
I run APEX SM-10 19 x 10.5 ET22 wheels on my SS 1LE all four corners with MS 4S 305 30 19 . This is rotatable and I do that every 4K miles. Tires has roughly 12K miles on them with 10 track days. Tires still have 60 per cent left. I DO NOT run a spacer up front but I did slightly grind the shock tower for clearance. I run 2.2 degrees NEGATIVE camber on front and 2.0 degrees negatve camber on the rear for my street setting. I change the camber on the front to - 3.6 degrees camber at the track using camber plates. Anything LESS than roughly -1.5 degrees negative camber, then you will have a small amount of tire poke at the top of the fender on BOTH the rear and front tires