|
Just to be clear, I can place the wideband sensor on the collector of the header? TSP told me it needs to be about 6" farther down stream.
Tuning a car, especially a torque-based ECM, is a lot more than just AFR. Adjusting virtual torque, torque limits, and of course your MAF table too.
Jannetty Racing will do the remote tune.
Agreed. Great time to add a 95mm TB, maybe add E too. If you’re paying for tuning and/or dyno time, might as well make it worthwhile.[/QUOTE]
Long story short: bought a package from a vendor and everything got f'ed up. I have a 103mm NW tb I would like to use, but don't know if it would work on a stock blower (blower was supposed to get ported). I also have a 14% ATI pulley. Could I use it also on a non-ported blower?
|