|
Sorry, I can't tell what you're asking. If you're going to cut a bung (8 total) into each exhaust pipe, the bung should be 3" or so from the flange but be careful to locate them such that they do not obstruct other work you will perform such as on spark plugs
__________________
2020 ZL1LE A10.
LME LT4 390 short block, LME CID Heads, Kong E2650, FBO.
15" conversion, MT ET Street R 325/15.
100 octane: 1045hp/1055tq.
100 octane + Meth (1x10+): 1117 hp/1067 tq
|