Quote:
Originally Posted by cdb95z28
Got it. It's a tough balance to try and find. Killing the inner shoulder makes you want to reduce the neg camber, but you'll have to baby the tires till they gain some temp/pressure so the outer shoulder lives. But right now, those current tires are telling us to run less negative camber.
But as I mentioned, there are other factors in play. I'm not convinced the inner shoulder wear is only a toe out problem. Maybe the toe out plays a part, by causing some of the dragging along of the inner less loaded tire. I think all that neg camber on that inner tire is the main problem. I have an article I found that talks about toe and ackerman. I'll try to dig it up....
|
In my case I am running zero toe and -2.9 camber. As you see the outside is not bad. I assume if the tires were pushed with low temp / pressure then outside would show unusual wear. I am going to try another set of fronts next month and keep pressures higher than 34 psi and see. Try some of the tips mentioned.