Quote:
Originally Posted by KingLT1
No problem.
Fwiw 1 just means it will down shift to 1st when it sees 1mph from the speed sensor. 0 means it will down shift to 1st when it sees 0mph. I don't see any condition that would see 318mph, that is usually the "disable" setting for the transmission adjustments. So in theory it should work but I haven't tried it yet.
|
Tried 318 and table would not take that input even though the range indicated was 0 to 318. Put in 0 but have not flashed that tune yet. Based on your logic of a number it will not see should work, then say, 100 should work. Still thinking.