|
Great Video
Great Video Jason!!! It just so happens we installed these plates TODAY on my 2019 SS . We found that the range we can get now is -1.8 degrees negative camber all the way to roughly - 3.6 degrees negative camber.
We earlier installed the SG3 suspension and 1LE sway bars along with ZL1 brakes (all work here done by AMP).
Anyway this weekend we will be trying the -3.6 degrees negative camber out on the 1.7 mile Motorsports Ranch at Cresson track.
Although I DO NOT have MAG RIDE shocks, the struts that come with the SG3 suspension apparently are exactly the same diameter below the threads that are on top of the front strut when compared to a MAG RIDE shock. . The reason I mention this is that when I originally received my plates the top bearing and bottom bearing inside diameter was SMALLER so the MY STRUT would NOT go through the camber plate but Jason at VORSHLAG quickly corrected this for me by over nighting the correct bearings. The SHAFT size on the strut JUST below the threads at the top of the strut should be around 14MM which is the same as the MAG RIDE setup.
|