Thanks for answering my questions and linking the other threads.
So, do you print and sell these? If so, please PM me the details.
Quote:
Originally Posted by Trochoidal
This pod directly replaced the stock vent/diverter. The factory vent/diverted is captured by a spherical bore (socket). The two halves of the socket are most likely fused at the seam during production after the vent/diverted is in place.
The trim ring is attached to the factory vent housing.
This mount goes inside of stock vent housing.
The gauge attached to the mount using the supplied clamp provided by the garage manufacturer. Slide the gauge through the front and the clamp in the rear has two plastic thumb screws the keep the gauge in place.
https://www.camaro6.com/forums/showt...php?p=10772205 |