|
Last fall I installed the BMR non adjustable control and trailing arms as well as the cradle lockout, on my Camaro ZL1, I was making 700 plus hp, they helped control the rear end but I still had some wandering side to side under hard acceleration but it was manageable.
This summer I installed a cam, lifters and low side fuel kit and boosted the power to 900 plus and the wandering side to side became almost uncontrollable.
As long as the tires were slipping it would track ok but when they hooked up it would immediately pull the rear end to the left and then back to the right repeatedly.
Working with my suspension guy we determined the toe in was changing drastically under hard acceleration causing the issue.
Upon examination we found the rubber bushings in the stock flimsy toe rod to be very soft allowing the movement.
I ordered the Toe rods from BMR and had them in two days, installed and they completely cured the issue.
|