Okay I decided to go this route. I picked an elbow off Amazon the same specs as close as I could get. 4in TB and 4in straight piece towards MAF length 7 inches. I got a 4 inch coupler for TB end and 4.25 straight Piece for MAF end.
The bend of the elbow was not the same so I had to cut and grind. I ended up putting the PCV intake hose underneath the elbow to hide the connection. Why did I do this, just didn’t like the two bugles where from the original elbow and especially when I got rid of the sound tube. This CAI was on the car from factory when I bought the car new. Would not have been my first choice. I am looking at the carbon Fiber CAI that they have. Anyone get that yet?
https://www.coldairinductions.com/sh...carbon-series/
__________________
LT4 1.7 Supercharger snout ported & 100% Meth
103 Katech TB, KATECH Custom Heads, DSX In-line fuel
TSP Headers, Spec P Super Twin Clutch, TSP EL C7 CAM
Diamond Piston & Manley Rods, Roto Fab Big Gulp
BTR Push Rods,LS7 Lifters, ARP, FI Chiller, Kirkey Seats
SJM Line Lock, Hurst Pistol Grip. 747/739 RWHP street tune - 821/794 RWHP track tune 101 octane.
2014 Mini Cooper countryman S All4 M6 daily driver
|