CAMARO6 - View Single Post

20Bluezl1 · 08-12-2020, 02:31 PM

So I've been reading alot of post regarding ceramic coating and I have seen that I really dont need that. So I have decided that this is the steps I'm going to take.

1. OG Decontamination Soap which will remove all wax and oils.

2. Optimum Ferrex which removes all the iron in the clear coat.

3. NanoSkin Glide with a clay bar and NanoSkin AutoScrub Sponge to really clean up the surface.

4. Raise car

5. Know I need a sealer that will give a new shine was thinking about McKees 37 10 min paint sealant. (Any other suggestions)

08-12-2020, 02:31 PM	#1
20Bluezl1 Drives: 2020 Zl1 A10 Riverside Blue Join Date: Mar 2020 Location: NJ Posts: 1,236	Exterior detail So I've been reading alot of post regarding ceramic coating and I have seen that I really dont need that. So I have decided that this is the steps I'm going to take. 1. OG Decontamination Soap which will remove all wax and oils. 2. Optimum Ferrex which removes all the iron in the clear coat. 3. NanoSkin Glide with a clay bar and NanoSkin AutoScrub Sponge to really clean up the surface. 4. Raise car 5. Know I need a sealer that will give a new shine was thinking about McKees 37 10 min paint sealant. (Any other suggestions)