CAMARO6 - View Single Post - FE2 Suspension -> FE3/FE4: Springs advice

Bumbleboy92 · 07-03-2020, 05:09 PM

I have a v6 with FE2 suspension.

I have a set of new FE3 suspension (struts/shocks/springs) and am about to go for a FE4 sway bar set. My car has 85k miles on it and the springs have been the same throughout.

I’m looking to see whether I should use my old FE2 springs or go for lowering springs like BMR who sell them for $160 with small cosmetic defects. I don’t really care to lower the car but if I’m taking all this apart anyways I feel as if I should change the springs as well. I’m not looking to spend more then $200 which is why I’m looking at BMR’s scratch/ding set.

Edit: turns out BMR’s springs are only v8
Edit2: they still fit v6 and lower slightly

07-03-2020, 05:09 PM	#1
Bumbleboy92 Long hauler Drives: 2022 Camaro 2SS 1LE Join Date: Mar 2017 Location: Houston, TX Posts: 2,046 View My Garage	FE2 Suspension -> FE3/FE4: Springs advice I have a v6 with FE2 suspension. I have a set of new FE3 suspension (struts/shocks/springs) and am about to go for a FE4 sway bar set. My car has 85k miles on it and the springs have been the same throughout. I’m looking to see whether I should use my old FE2 springs or go for lowering springs like BMR who sell them for $160 with small cosmetic defects. I don’t really care to lower the car but if I’m taking all this apart anyways I feel as if I should change the springs as well. I’m not looking to spend more then $200 which is why I’m looking at BMR’s scratch/ding set. Edit: turns out BMR’s springs are only v8 Edit2: they still fit v6 and lower slightly __________________ 2022 2SS 1LE - Window Sticker - Cold Air Inductions Elite Carbon CAI 2016 1LT v6 - Totaled Happiness: Infinite Last edited by Bumbleboy92; 07-06-2020 at 02:05 PM.