Quote:
Originally Posted by SCCAForums
Looks good!
You think possibly like a 20MM offset square? And just use a 10mm spacer with some extended studs?
Best regards,
Dave
|
Actually I used an APEX SM10 wheel with ET22 offset all the way around on a 19 x 10.5 inch rim. I them used 305 30 19 on all four corners on my 2019 Camaro SS without MAG RIDE. With 1.5 degrees of negative camber on all four wheels this eliminated top tire poke. I did NOT use a spacer on the front but DID slightly grind the top of the strut mount for clearance. This of course is a ROTATABLE wheel/tire setup. here is reference post:
https://www.camaro6.com/forums/showt...=515659&page=6