CAMARO6 - View Single Post - Massive a/w intercooled intake and interchiller data

parish8 · 05-26-2020, 01:23 PM

I finally got around to working on my car again and have some data. I will have lots of data eventually.

I opted for the stage 2 interchiller set up which gets you a 2nd condenser and supposedly temps down near 0deg. Unfortunately it isn’t working out quite that well. After doing a fair amount of reading it seems our style of compressor is limited as to how much suction it can pull. Suction = low pressure = low temp.

What am happy about and what the stage 2 kit is likely helping with a little is how quickly it chills the fluid. This thing takes 5-6gallons is fluid and drops it from 72deg down to 30deg in 15minutes flat. 😳

I will be logging everything under the sun once I get it driving and have more data like air temps.

05-26-2020, 01:23 PM	#16
parish8 Drives: 17 SS a8 Join Date: Feb 2010 Location: omaha Posts: 1,678	I finally got around to working on my car again and have some data. I will have lots of data eventually. I opted for the stage 2 interchiller set up which gets you a 2nd condenser and supposedly temps down near 0deg. Unfortunately it isn’t working out quite that well. After doing a fair amount of reading it seems our style of compressor is limited as to how much suction it can pull. Suction = low pressure = low temp. What am happy about and what the stage 2 kit is likely helping with a little is how quickly it chills the fluid. This thing takes 5-6gallons is fluid and drops it from 72deg down to 30deg in 15minutes flat. 😳 I will be logging everything under the sun once I get it driving and have more data like air temps. Attached Images __________________ dropped a valve in the 6.2. now running a drop in rods and piston 5.3 best et 5.83@121 with the 5.3 http://www.camaro6.com/forums/showthread.php?t=465472