|
Cam Motion does have an option of 4 degrees VVT on their smaller grinds... My original cam was 22 degree. No tuner I know of plays with though. If I was completely bored and had a time machine maybe. I'm actually OK with 4 degrees on a small cam and 6800 RPM with 130 seat springs. But at some point RPM and spring you probably want a solid gear (compete lock).
__________________
Forged short block, large duration sub .600 lift Cam Motion cam, 7200 RPM fuel cut, Pray Ported Heads, 3.85 pulley D1X, stage II intercooler, DSX secondary low side, DSX E85 sensor, Lingenfelter big bore 2.0 pump, ported front cats, 60608 Borla, LT4 injectors, ZL1 1LE driveshaft and Katech ported TB, ported MSD intake, BTR valvetrain, ARP studs, ProFlow valves, PS4 tires.
Last edited by oldman; 05-10-2020 at 01:22 AM.
|