CAMARO6 - View Single Post

Hellphyre · 04-30-2020, 10:57 AM

Hi, all!

I went ahead and checked my axle nuts today. Passenger-side axle nut was fine (factory marks lined-up). Driver-side back out five-degrees (about half the width of the marker). I went ahead and tightened it. Best I could do was a breaker bar (no impact tool used).

I have a 2019 ZL1 with 2500 miles. I do track days and spirited driving.

04-30-2020, 10:57 AM	#44
Hellphyre Drives: 2019 Chevrolet Camaro ZL1 Join Date: Apr 2020 Location: Garland, Texas Posts: 3	Hi, all! I went ahead and checked my axle nuts today. Passenger-side axle nut was fine (factory marks lined-up). Driver-side back out five-degrees (about half the width of the marker). I went ahead and tightened it. Best I could do was a breaker bar (no impact tool used). I have a 2019 ZL1 with 2500 miles. I do track days and spirited driving.