Quote:
Originally Posted by SoCal Smith
I fixed that same issue by applying the correct torque to the lug nuts. The factory was sending them out at 110lb and the zl1 needed to be at 140lb. 110lb was supposed to be only for the SS.
Please refer to your owner's manual for the correct numbers.
|
The spec is the same 140 lb-ft for the 6th gen SS. 110 may have been it for an older gen.
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq
Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle Terminator cam | LT4 FS & injectors | TSP forged pistons & rods
JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune
1100 - 1/30/18 | 2000 - 1/31/18
3000 - 2/06/18 TPW 2/26/18
3400 - 2/19/18 | 3800 - 2/26/18
4300 - 2/27/18 | 4B00 - 3/01/18
4200 - 3/05/18 | 4800 - 3/14/18
5000 - 3/16/18 | 6000 - 3/19/18