CAMARO6 - View Single Post

Choda · 04-07-2020, 02:10 PM

I used a large pry bar between the flange on the rear end and the driveshaft. I could not do it by hand.

04-07-2020, 02:10 PM	#9
Choda Drives: Turbo 6.2 Join Date: Feb 2019 Location: Buffalo Posts: 736	I used a large pry bar between the flange on the rear end and the driveshaft. I could not do it by hand. __________________ 2016 Twin Turbo Camaro SS - 968hp/970tq 8.9@153 2018 LTZ Z71 Redline Silverado - 381hp/420tq 13.8@100