|
I use the Motive brake bleeder - it has a pressure gauge and fitting (cap) that connects to the master cylinder. Add a liter of brake fluid, connect SECURELY to master, pump to 20 psi, then bleed each caliper (upper and lower). Usually have to re-pressurize the bottle a couple of times if flushing versus bleeding. One person 15 minute job. No more stressed wife pumping the brakes and premature pedal release.
Special NOTE 1. De-pressurize bottle before removing from master cylinder.
Special NOTE 2... Test the connection and pressure without fluid. You may have to use the larger extra rubber washer to ensure no leak.
Special NOTE 3 ... Re-read note 1
|