CAMARO6 - View Single Post - Refitting ported supercharger

Zigg L1 · 03-24-2020, 08:04 PM

Google it there is a picture of the pattern and tourqe is 89in lbs. Use a 1/4" drive torque wrench. I reused my bolts once but wouldn't recommend more then that. And be sure not to over torque. 89 inlbs is not alot. Wouldn't take much to snap them

03-24-2020, 08:04 PM	#5
Zigg L1 Drives: 2018 ZL1 Garnet Red Tintcoat A10 Join Date: Jan 2019 Location: NY Posts: 537	Google it there is a picture of the pattern and tourqe is 89in lbs. Use a 1/4" drive torque wrench. I reused my bolts once but wouldn't recommend more then that. And be sure not to over torque. 89 inlbs is not alot. Wouldn't take much to snap them