Quote:
Originally Posted by sr71bb
With the 15MM spacer, how close does the INSIDE of the wheel come to the STRUT???
|
The 285 35 fk510 fits but the lexina 295 35 dont.
The 295 is too big and will hit the strut when turning. And caint put it out any futher it will rub the fender on a really big bump. The 285 I run is the fk510 and it is a wide tire. As far as the rim it will go stright on and just almost touch the strut with the 39 offset.
Problem is the 285 is so tall, and the strut has shch a big seat for the spring.
Their is a little wiggle room with the front strut with changeing the camber more postive. That will more the top of the tire away from the strut. A little dab will do you here although I have not moved mine and are stock settings.
Frankly a 305 30 will work with a 10.5 rim but you will have quite a bit of poke but the tire is so short its away or below the strut. That was a 10.5 i have for the rear with a 40 offset.
https://www.willtheyfit.com/index.php? can help.
This is the numbers I put in for the stock 9.5 rim
275 35 20 with a 39 mm off set postive. Thats as close as you can go toward the strut. Then you can safley move it out by 20 mm. I have heard some do 25. I think 25 would look better. Something to play with. But this reall only does the rim.
http://www.rimsntires.com/specspro.jsp
Heres another one but use the tire width and tall size and this will do more the tire size fit. I mean the tire in inches from like info from tire rack or the manafucture .But when getting into a 28 tall tire it makes the car look lowered but its really just a touch higher.