Quote:
Originally Posted by Jb54
Have you ever had to work on anything inside of car door before? If you have, you would understand the high labor cost. It isn't easy to replace anything inside a door. Lots of things to cut and scrape you, and even take your finger off, if you're not careful. Takes lots of patience, small hands and proper tools and technique.
|
Correct, for an exterior door handle. But this is an interior door handle. It is attached to the interior door panel. Remove the panel, unhook the cable, unplug the wiring harness and it should be 1 or 2 screws holding it on. Pretty simple and less than an hour of actual labor.
__________________
2018 Hyper Blue Metallic 2SS 1LE with Nav, PDR, and track alignment
1:28.95 Willow Springs Big Track