UPDATE #1: Wiring Diagram posted below in original post for reference
UPDATE #2: Nitrous Kit is installed and below are all the YouTube Videos on How I installed it along with Testing
UPDATE #3: Did my first test hits on the Nitrous! See image below of the Draggy time comparisons from NA, 50, 100, 150(rich afr)
going from a 4th gear 40-100mph run starting at 38mph on each.
Nitrous Install Series:
Part 1: Solenoids, Plate, and Bottle Install:
https://youtu.be/5hDOWt0keDo
Part 2: Dedicated Fuel System Install:
https://youtu.be/gJtp4F8CK2g
Part 3: Electrical Wiring :
https://youtu.be/DwDzY2jUIyo
Part 4: Testing Wiring and Setting Up Controller:
https://youtu.be/DwDzY2jUIyo
Part 5: Fuel Pressure Set Up and FPSS Testing:
https://youtu.be/doiRSEcJmbc
Well I finally decided to pull the trigger. Want to use this post to keep everyone updated on the install and final set up.
What I currently have: 2019 Camaro SS Heads,Cam,Ported MSD,Ported 95mm TB, 1 7/8 headers, E85. Car has ran a best of 10.9 at 130 with TB closing 2 and 3rd gear.
That tb issue should be corrected, but wont be able to test until i get the car back from the body shop. (hit while parked...)
Nitrous Set up Ordered:
Nitrous Outlet MSD hardline kit w/ 15lb bottle, nitrous pressure gauge
Console switch panel
"Big Show" Purge Kit
LNC-2014 Timing Retard box with Limiter
NOS mini progressive controller
JMS TPS pigtail for TPS signal
Nitrous Outlet Stand alone Camaro fuel system with Fuel Pressure Safety Switch and fuel pressure sensor.
The plan is to start with a 100 shot and eventually move up to a 150-200 with C16 for the fueling.
Let me know what you guys think about the set up? I will be installing this in the next month or so and will be documenting it on my YouTube Channel Jorge Loves Speed.
Looking forward to runing the nitrous kit! I would like to be able to run a mid 10 with just NA and no tb issues, and then do a 100 shot to get close to a 9 second pass! from there we will see just how much we want to push it.