Quote:
Originally Posted by Danew_377
For the arc-8 are there going to be any other colors besides the anthracite and satin black? Looking to get a set in your 19x10 as a square setup. Hoping for a bronze or copper.
|
Yes we do plan to come out with some bronze ARC-8 options in the future, I'd estiamte they are 4-5 months out depending on what size you run.
Quote:
Originally Posted by Blackmonba6Gen
After a long decision looking at different wheel manufacturers, I just placed an order on the following setup from APEX ARC 8 the site say direct fit:
Front: 19x10” ET20 with 285/35-19 tires
Rear: 19x11” ET43 with 325/30-19 tires
Tires choices in mind: Nitto G2’s,NT01,Michelin PS4S
I do have MRC. Will the 325s cause any rubbing or issues with the strut with such a wide tire with stock height? I seen lots of threads with 305 but not 325 for an SS. It seem the 1LE are popular. I’ve been trying to find some photos with this setup to wrap my head around it and haven’t ran across any yet. If any photos please share as I’m curious to see how it will look before buying the tires. Thanks
|
325s will not be an issue to use out back with the 19x11" ET43. You could always run a small 3mm spacer if you wanted to get more room, but it's not required.
Quote:
Originally Posted by Qlimax
Did this set up require any mods? Pretty much I need a 19x11 rim that fits with a 305tire probably with Michelin p4s for the rear. And I would prefer if you told me what tire specs I should match with the arc 8
|
Nope, this setup is a direct bolt on to any 6th Gen Camaro. I would use 275/35-19 or 285/35-19 up front on a 19x10" ET20, and then 305/30-19 out back on the 19x11" ET43.