[JD_]

Originally Posted by carguy55

After a lot of research I came up with this parts list for using Apex 19x10.5 ET22 wheels for a 305 true square setup using the strut mod method and 5mm spacers. Any other idea or comments for parts needed? There may be other sources that are cheaper.

AUTOKAY TPMS (4 pack) 13598787 QTY 1 $56
(this is the cheap option, ACDelco parts are $45 each)
https://www.amazon.com/AUTOKAY-Press.../dp/B081F1JX26

ARP WHEEL STUDS KIT 100-7736 QTY 2 $54 each
https://www.amazon.com/ARP-100-7736-.../dp/B077YDZ1WK

5MM SPACERS $35
https://wildhammermotorsports.com/16...-2-wildhammer/

Gorilla black lug nuts 3/4 hex" 45148BC-20 $100
https://wildhammermotorsports.com/16...black-gorilla/

McGuard Black locks 24220 $32
https://www.amazon.com/McGard-24220-.../dp/B0028090JM

Love that you put everything needed in one post, but it did bring up a question for me. Did you consider going with the camaro specific version of these wheels, just with the 35 offset?
https://www.apexraceparts.com/shop-b...aro-wheel.html

You would still need the spacers and longer studs, but you would not have to worry with the hub rings. just a thought.

JD