Quote:
Originally Posted by gotswap
Not sure how long condensation would last being that close to the heads, the heat would remove it in seconds
|
I agree, but AEM thinks its enough of an issue to warrant putting a warning in their documentation for it. That's why I asked. See page 12...
https://www.aemelectronics.com/files...ller-Gauge.pdf
Looking at TMS's photos again above, it may not be an issue since the pipe at that location is not 100% vertical and the O2 sensor, if the bung is welded perpendicular to the pipe with no angle, wont be 100% horizontal. The angle his installed pictures were taken from might be throwing off my perspective some.