[Chutzpah]

Originally Posted by Gunkk

Put the stand under the X-brace at the weld between the bolts... so the load is on the bracket at the pinch weld, not further up the bar.

Here's a good example:

https://www.camaro6.com/forums/showp...07&postcount=9

Originally Posted by Gunkk

If you want cheap, go for one of these:
https://www.amazon.com/YZ-Room-Unive...a-833720088469


... or even cheaper: slot your own hockey puck.

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
I've used this particular puck as well the jack stand method, this is the way to go.