CAMARO6 - View Single Post

Gunkk · 11-27-2019, 02:28 PM

Put the stand under the X-brace at the weld between the bolts... so the load is on the bracket at the pinch weld, not further up the bar.

Here's a good example:

https://www.camaro6.com/forums/showp...07&postcount=9

11-27-2019, 02:28 PM	#12
Gunkk Thank you Al Oppenheiser! Drives: Red Hot A10 ZL1 Convertible Join Date: Jun 2017 Location: Sarasota, FL Posts: 5,183 View My Garage	Put the stand under the X-brace at the weld between the bolts... so the load is on the bracket at the pinch weld, not further up the bar. Here's a good example: https://www.camaro6.com/forums/showp...07&postcount=9