Quote:
Originally Posted by LiqTenExp
Talked with TMS and got the contact parts list he used. There should be no need to cut wires, simply extract factory wire, crimp/mate/shrink to JMS red wire with new contact, install boot/crimp/insert white wire back into factory connector.
571-8289051 (Seal)
571-1326032-6 (female 12AWG)
571-1-1326031-2 (male 12AWG)
571-1326031-5 (male 14AWG)
571-1-1326032-1 (female 14AWG)
He wasn't sure if it was 12 or 14 AWG contacts. I ordered both and will update with the correct size once I get the parts.
|
It should also be noted that these part numbers are Mouser Electronics specific numbers. They are not the manufacturer part numbers. Thanks to LiqTenExp for posting the update.
__________________
JRE Tuned (HPTuners) | 15% OD (9.17" crank pulley) | TVS2300 Maggie Heartbeat Supercharger - 14 psi | E-50 (DSX Flex Fuel kit) | JMS FuelMax Fuel Pump Booster | LPE Big Bore High Volume DI fuel pump | LPE High Flow DI fuel injectors | LT5 95mm TB | RotoFab CAI | AEM X-Series OBD2 wide band gauge | Elite Engineering E2-X catch can | Borla S-type NPP Cat-Back 3" exhaust | Forgeline GTD1 5-lug Satin Graphite | SunTek wrap | C-Quartz Finest Reserve ceramic coated