Quote:
Originally Posted by KingLT1
Simple..
In HPT. Engine/Fuel/Cutoff,DFCO
Set extreme cut-off- 7000
In Gear- 7000 for all gears. I leave park, neutral, reverse set 6000.
EOT(engine oil tem)- 7000 above 41 degrees for all speed.
Extreme Resume 6990.
This is if you want a 7k rpm rev limit. If you want higher then change accordingly. I shoot for 2-300rpm above the shift points.
|
Yea thats most of it but it was still soft when i first tried that, i had to increase torque requested as it nears the limit so that it didnt close the throttle as much