CAMARO6 - View Single Post - Ticking noise after header install

JCunningham · 11-03-2019, 10:42 PM

i used ARP https://www.summitracing.com/parts/a...make/chevrolet 132inlbs then 20ftlb on new gm gasket. You should take it for a ride then re torque to 20. (mine have never loosened up and i dont use loctite.
headers dont come with heat shields but you should use heat tape DEI https://www.summitracing.com/parts/dei-010408
you have to tune for headers so you will get a light. until you do.
.

11-03-2019, 10:42 PM	#47
JCunningham Drives: 2017 2SS M6 Join Date: Jun 2013 Location: WNY Posts: 7,069	i used ARP https://www.summitracing.com/parts/a...make/chevrolet 132inlbs then 20ftlb on new gm gasket. You should take it for a ride then re torque to 20. (mine have never loosened up and i dont use loctite. headers dont come with heat shields but you should use heat tape DEI https://www.summitracing.com/parts/dei-010408 you have to tune for headers so you will get a light. until you do. . Attached Images __________________ real ZL1 wheels and brakes, 285/305 Michelin Pilot Super Sports, Pray ported Intake manifold, Soler Throttle Body, Rotofab intake, EFI Tuning Flex fuel kit, full American Racing Headers Exhaust, 1 7/8" w/ cats H pipe and mufflers. Full 1LE suspension, with BMR adjustable sway bars and links, GM aluminum cradle bushings, Hurst shifter with lighter reverse spring, TWM shifter knob, Tick level 1 transmission. I should have bought a ZL1