Quote:
Originally Posted by cooper1965
I can not see your log, but it sound like you are logging accelerator position, instead of throttle position. Typically it ready 40% at WOT. Throttle should read between 86-99%. Also, you can damage the stepper motor by manually forcing the throttle open and closed by hand.
|
Accelerator position and throttle position are both being logged. The channel ID for TPS that I am using is 2111. Here is a screen cap from the last drive log I did. At WOT, TPS is only showing a maximum of 39.2%, but the throttle, I'm convinced, is open fully (98-100%).