|
To say this installs as easy as pie is an exaggeration.
Pie is MUCH more difficult.
As has been stated elsewhere, loosen both ends of the air intake duct so you can move it out of the way, loosen bottom right bolt on the throttle body first due to it being the least easily accessible of the four, and that dreaded 2019 gray ECM connector... I reached under the connector before I pulled the old throttle body off, put my index finger on the raised ridge at the rear of the tab and ever so slightly moved the tip of my index finger towards my wrist, it unlatched and the connector fell off under the tension of the wiring harness. So much for that.
In any event, easy off, easy on, reattached ECM connector latch, wrenched the 4 bolts down to "pretty tight", reconnected and re-tightend intake duct clamps and we are D-O-N-E.
I'll post a few pictures later, right now my ECM has some relearning to do and it is a very nice day out there.
|