Quote:
Originally Posted by Tazz3069
I have a couple of questions. I am getting ready to do a header install. when lifting the car, did you lift the front first? Did you use 1 or 2 floor jacks on the front end?
Mark
|
I used 4 6 ton which were able to get me 24 inches off ground. If been told that if u use 1 7/8 headers u can come in from top. But I had 2 in headers so they were just to fat to come in top side had come in from bottom and order to do that have to have at least 22 inches of clearance I'd say. But this is just how I did it. Others may of had better luck. But highly recommend 6 ton jack stands for the extra clearence