Quote:
Originally Posted by warren3537
So after looking high, low and in-between with no success for an aftermarket diffuser for the dual exhaust, I have a factory diffuser on the way and need to know what kind of prep is needed, I plan on getting it painted gloss black but need some input just to make sure the paint will stick to it without flaking or chipping off.
|
Wash with warm, soapy water
Dry
Wipe down good with a gray scotch pad (automotive, not dishes )
Rinse and dry
Wipe down with an anti-static agent or Tack Cloth
Spray light coats of a Plastic Adhesion Promoter ( 3 x )
Primer ( 3 x )
Base Coat ( 4 x )
Clear coat if desired (3 x )
* Spend the time in your prep work and save yourself the headache.
Scuff everywhere with the gray scotch pad, until a dull grayish.