CAMARO6 - View Single Post

EDFHOBBIES · 07-18-2019, 01:53 PM

On my 2650 page I show how to make the ADM edelbrock setup... for about 60 bucks

I think bite the bullet take out the carpet out and the large foam part in the tire well and run the rule 3700 5 to 7 gallon tanks they work very dam well for 500 or lower.

Or if you have mucho dinereo and care about trunk appearance and want to hide the reservoir a custom tank with the Stewart emp mounted on the rear crash support.

1200.00 buck option maybe more if you ger real fancy with AN lines...

right now Im having a tank made with an exchanger built inside it where i lay ice on the exchanger so i don't deal with flushing or draining the ice out of the system..

07-18-2019, 01:53 PM	#9
EDFHOBBIES Dyno Show Queen LOL Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014 Location: Houston Posts: 4,354 View My Garage	On my 2650 page I show how to make the ADM edelbrock setup... for about 60 bucks I think bite the bullet take out the carpet out and the large foam part in the tire well and run the rule 3700 5 to 7 gallon tanks they work very dam well for 500 or lower. Or if you have mucho dinereo and care about trunk appearance and want to hide the reservoir a custom tank with the Stewart emp mounted on the rear crash support. 1200.00 buck option maybe more if you ger real fancy with AN lines... right now Im having a tank made with an exchanger built inside it where i lay ice on the exchanger so i don't deal with flushing or draining the ice out of the system.. Attached Images __________________ Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber