Update:
So, today i decided to figure out my passenger side heat actuator problem.
I started with pulling carpet away from foot rest area, than removing 3 - 7mm screws from plate under neath the glove box compartment. Once that was dome, i removed all modules which were attached to the plate so i could remove it from the vehicle. Than, i removed glove box it self.
That allowed me to see broken actuator.
Actuator was making clicking noise every time it went to HOT or COLD end position.
So... I decided to remove it somehow...
First, i took cabin filter out. I was thinking, i could gain access to one of two screws that holds actuator in position.
No luck...
First, front screw went out very easy, but one on top back side was a big problem...
there was no way for me to lose that screw with limited tools i had...
So i decided to brake it of somehow...
After few minutes and few magical words (@!#?!!$&@) i was able to brake it lose.
Than, using multitool, i cut off little piece of plastic from behind the glove box and also metal reinforcement. That helped me to take it out so easily.
Now, i need to buy exact part (Actuator) and pray so i can put it back in somehow
Here is few pictures i took for you guys.