Quote:
Originally Posted by StPeteHyper2.0
Use a Audiocontrol LC2i.. easy install with the sub thump harness. Use the rear L/R wires to eliminate amplied door chimes. You can also unplug the harness to the left of where you plug the sub thump harness into the amp (closest to the back of car) to delete unnecessary noises such as exhaust imitations.
|
I actually went with the sub thump harness for the speakers and their harness to deactivate the noise cancelation along with a line out converter. It’s going to be a basic setup with one powered 12” sub.
The thing I can’t find a clear answer to is what do I use for the remote wire. I’m thinking a fuse tap into the “AMP” fuse but I’ve read that it has constant power.
Any idea where I can attach that remote amp turn on wire?