CAMARO6 - View Single Post - Helix sequential LED rear tails (amber) fitted

Gary H · 06-23-2019, 06:06 AM

After some research I went with the Helix tails.
Easy to fit, all LED and they have a switch on the back to change from sequential to fixed flash on the indicator.
(I need amber for the UK)
The only addition was a Gen5DIY wiring harness that stops the camera being permanently on due to the current sensing draw from the reversing LEDs.
Huge thanks to them for overnighting the cable, meaning the car could get sorted and on it's way to the Port to start it's 4500 mile journey!

Video - please excuse the quality

06-23-2019, 06:06 AM	#1
Gary H Drives: Camaro ZL1 Join Date: Apr 2019 Location: London, UK Posts: 304	Helix sequential LED rear tails (amber) fitted After some research I went with the Helix tails. Easy to fit, all LED and they have a switch on the back to change from sequential to fixed flash on the indicator. (I need amber for the UK) The only addition was a Gen5DIY wiring harness that stops the camera being permanently on due to the current sensing draw from the reversing LEDs. Huge thanks to them for overnighting the cable, meaning the car could get sorted and on it's way to the Port to start it's 4500 mile journey! Video - please excuse the quality Attached Images __________________ Made in the USA. Refined in Great Britain - insta: zl1uk Velossa intake, Rotofab, Mamo TB, Custom ported NX Lid & Jokerz Full tilt ported LT4 charger, 3 port CoolingMist Meth injection - ATI 15% lower pulley, E2X CC, TSP ceramic coated longtubes, de-cat and Borla 60608 to NPP box, JRE tune, BMR rear control & trailing arms, lock-out kit, lowering springs and front strut brace, Custom carbon trim interior, Xpel ultimate front PPF and Prestige window tint with Chameleon Windscreen tint...ever evolving...